The gel-coat finish on Duracraft fiberglass accessories is approximately 1/8" thick and therefore is resistant to nicks and scratches. Minor nicks and scratches can be easily buffed out to restore the color and sheen of your product. Follow the instructions below for metallic finishes.

Metallic finishes will develop their own patinas as they continue to age. If you would like to adjust the developing patina, bring back the metallic luster or buff out minor scrapes and scratches, simply take a piece of fine (00) steel wool and briskly rub the affected areas. Color will be restored, scratches will be erased, and patinas will disappear (if desired).

To slow down the developing patina simply apply a very slight touch of a hard floor wax after buffing the product with steel wool.

The gel-coat finish on Duracraft fiberglass accessories is approximately 1/8" thick and therefore is resistant to nicks and scratches. Minor nicks and scratches can be easily buffed out to restore the color and sheen of your product. Follow the instructions below for non-metallic finishes.

Minor scratches and scrapes on non-metallic finishes can be removed by taking a piece of very fine (#160) sandpaper. Rub the affected areas until the blemish or scrape is removed.